最新訊息 HONG YUAN LIN Technology Co.,Ltd歡迎來電洽詢,竭誠為您服務
首頁 / 店家商品 / VQ-2000
產品

VQ-2000

Main Colors:
Green, Blue, Red, Yellow, and Black
Application Scopes
VQ-2000 can be applied on each type of concrete, terrazzo floor, and wear-resisting ground; moreover, it can enhance the beauty and fashion of the floor
Features
- With the functions of dyeing and protection (being waterproof and oil-repellent)
- Reach to over 1000 hours by QUV test (around 3-5 years outdoor; around 8-10 years indoor)
- easy construction; shorten the labor hours
- Any colors can be deployed to satisfy the customer’s requirement
- The uniformity of color is excellent
1. Dilute the VQ-2000 with water
Use two to five times as much water to dilute the raw liquid of VQ-2000 (the ratio of VQ-2000 to water is 1 : 2-5) according to the different shades of the color you want the concrete to be dyed. The more purified the water you use to dilute VQ-2000, the more stable and longer the diluted VQ-2000 can be preserved.
2. The condition of the concrete before applying VQ-2000
After applying the densifier on the concrete and finishing the process of fine grinding with over #500 resin pad, grind the concrete with water while processing the last grinding so as to avoid the wax on the grinding pad being left and addicted to the surface of the concrete, which might affect VQ-2000’s penetration into the concrete.
3. When to apply VQ-2000 dyeing agent
After using the floor scrubber to wash and clean up the concrete and waiting the surface of the concrete to get close to finger-dry( the surface of the concrete should be a little moisturized but not too moisturized), and it’s time to apply VQ-2000 on the concrete averagely to dye the color you want on the concrete. Never apply VQ-2000 on the concrete while there is clear water left on the surface, which might also affect VQ-2000’s penetration into the concrete.
4. The cautions you should pay attention to while applying VQ-2000
Polish the concrete dyed with VQ-2000 with polishing machine installed with white polishing pad as long as the surface of the dyed concrete gets finger-dry (about 30-60 minutes later on sunny days) so as to make the color dyed on the floor looks more average. Never use the resin pad to grind the concrete floor after you use VQ-2000 to dye the color on the concrete. And never apply VQ-2000 on the dry concrete so as to avoid the agent of VQ-2000 getting dry too quickly, which might cause you the difficulty to dye the color on the floor averagely.
4. The cautions you should pay attention to while applying VQ-2000
Polish the concrete dyed with VQ-2000 with polishing machine installed with white polishing pad as long as the surface of the dyed concrete gets finger-dry (about 30-60 minutes later on sunny days) so as to make the color dyed on the floor looks more average. Never use the resin pad to grind the concrete floor after you use VQ-2000 to dye the color on the concrete. And never apply VQ-2000 on the dry concrete so as to avoid the agent of VQ-2000 getting dry too quickly, which might cause you the difficulty to dye the color on the floor averagely.

The usage amount:
Once about 30-50g per square meters, you can spray, roll, or paint the agent on the concrete as long as it can be applied averagely on the concrete, if you want to get the color on the concrete deeper, you can apply the agent again after the dyed concrete surface gets finger-dry.
5. After applying VQ-2000 dyeing agent
After applying VQ-2000 dyeing agent, you must apply VQ-1009, VQ-1688 or VQ-3200 as the sealer to seal the concrete floor.
VQ-2000 Test Report
Chemicals Resistance
Eight Soluble Metal
Formaldehyde
Heat Resistance
Water Resistance
Weather Test

產品問與答
  • 姓名
  • E-mail
  • 手機
  • 電話
  • 驗證碼
  • 留言內容
其他相關商品: